Load data for .45 Glock Auto Pistol + .450 | 155gr | Impala LWFP KS

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.450 \| 155gr \| Impala LWFP KS
Bullet Weight:	155gr \| 10.0g
Bullet Diameter:	0.450" \| 11.43mm
Bullet Length:	0.632" \| 16.1mm
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	1.119" \| 28.4mm
Seated Depth:	0.272" \| 6.9mm
Shank Seated Depth:	0.272" \| 6.9mm
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B3026_C733
Last updated:	2025-01-01

Load data for 46 loads in caliber .45 Glock Auto Pistol with .450 | 155gr | Impala LWFP KS bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	76%	16824	89%	**8	93%
[Alliant BULLSEYE]*	<<locked>>	64%	16824	89%	**4	86%
[Alliant UNIQUE]*	<<locked>>	75%	16592	88%	**04	85%
Baschieri & Pellagri 100	<<locked>>	66%	15795	84%	**5	96%
Hodgdon Universal	<<locked>>	66%	16911	90%	**8	94%
Hodgdon TrailBoss	<<locked>>	96%	10211	54%	**5	96%
[Lovex S020]*	<<locked>>	70%	16694	89%	**1	88%
Maxam CSB 1	<<locked>>	77%	16520	88%	**8	93%
Maxam CSB 2	<<locked>>	80%	16447	87%	**40	98%
Maxam CSB 3	<<locked>>	71%	16708	89%	**8	97%
Maxam CSB 4	<<locked>>	65%	15911	84%	**5	99%
ReloadSwiss RS 12	<<locked>>	66%	15824	84%	**17	99%
ReloadSwiss RS 14	<<locked>>	94%	9906	53%	**1	91%
[ReloadSwiss RS 20]*	<<locked>>	79%	15708	83%	**7	86%
[SNPE Vectan A0]*	<<locked>>	76%	16723	89%	**1	85%
[SNPE Vectan BA 9]*	<<locked>>	66%	15606	83%	**8	89%
SNPE Vectan BA9 1/2	<<locked>>	66%	15302	81%	**8	91%
[Somchem MP200]*	<<locked>>	66%	15751	84%	**5	82%
[Somchem MS200]*	<<locked>>	70%	16491	87%	**1	86%
Vihtavuori N320	<<locked>>	65%	15142	80%	**5	98%
Vihtavuori N32C Tin Star	<<locked>>	91%	15940	85%	**2	100%
Vihtavuori N330	<<locked>>	74%	16679	88%	**24	95%
[Vihtavuori N340]*	<<locked>>	73%	15853	84%	**8	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate Solo 1250]*	<<locked>>	62%	12285	65%	**3	87%
[Alliant BULLSEYE]*	<<locked>>	60%	15011	80%	**5	84%
[Alliant UNIQUE]*	<<locked>>	62%	12836	68%	**9	80%
Baschieri & Pellagri 100	<<locked>>	62%	14446	77%	**3	95%
Hodgdon Universal	<<locked>>	62%	15011	80%	**8	92%
Hodgdon TrailBoss	<<locked>>	79%	8499	45%	**6	94%
[Lovex S020]*	<<locked>>	61%	13503	72%	**9	84%
[Maxam CSB 1]*	<<locked>>	62%	12241	65%	**0	87%
Maxam CSB 2	<<locked>>	60%	11182	59%	**9	93%
Maxam CSB 3	<<locked>>	61%	13590	72%	**6	94%
Maxam CSB 4	<<locked>>	60%	14199	75%	**6	97%
ReloadSwiss RS 12	<<locked>>	62%	14199	75%	**1	99%
[ReloadSwiss RS 14]*	<<locked>>	77%	8311	44%	**3	88%
[ReloadSwiss RS 20]*	<<locked>>	66%	12285	65%	**6	80%
[SNPE Vectan A0]*	<<locked>>	67%	13677	73%	**9	81%
[SNPE Vectan BA 9]*	<<locked>>	62%	14359	76%	**2	87%
[SNPE Vectan BA9 1/2]*	<<locked>>	61%	14011	74%	**9	89%
[Somchem MP200]*	<<locked>>	62%	14475	77%	**5	80%
[Somchem MS200]*	<<locked>>	61%	13445	71%	**3	82%
Vihtavuori N320	<<locked>>	60%	13532	72%	**9	97%
Vihtavuori N32C Tin Star	<<locked>>	62%	9819	52%	**5	99%
[Vihtavuori N330]*	<<locked>>	61%	12227	65%	**6	89%
[Vihtavuori N340]*	<<locked>>	64%	12923	69%	**9	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data